NLL Substation Bolt Aluminum Alloy Tension Clamp & Insulation Cover

Short Description:


Product Detail

Product Tags

Description:

NLL series aluminum alloy tensile clamp for power distribution, suitable for overhead lines of 10kV and below, power plants and substations, fixed overhead insulated aluminum wire or bare copper wire, fixed on the corner or terminal insulator of the rod, thus The overhead wires are fixed or tightened, and an insulating cover is used for insulating the wires to provide insulation protection.

Because of the non-hysteresis high-strength aluminum alloy material and the heat treatment process, the product has the advantages of high strength and low line loss, and is an energy-saving fitting worthy of promotion. Our company has developed the NLLJ series of high grip strength modified products with self-tightening function according to the user’s requirements, which can meet the grip force requirement of the insulated wire without peeling.

Structure Features:

1. Non-tape high-strength aluminum alloy body with high strength and low line loss

2. The pressure block is connected with the “U” bolt, which is very convenient to install.

3. Each “U” bolt is fastened to a separate one to ensure uniform contact pressure

Insulating Cover Features:

1.Power frequency withstand voltage: ≥45kV for 1 minute without breakdown, no flashover;

2.Insulation resistance: >1.0×1014Ω

3.Ambient temperature: -300°C~900C

4.Weather resistance: good performance after 1008 hours of artificial weathering test

as

Type

JKLY10(1) Overhead Insulation Aluminum Stranded Wire Stripping Installation Specifications (mm2)(10kV)

JKLY10(1) Overhead Insulation Copper core Aluminum Stranded Wire Stripping Installation Specifications (mm2)(1kV)

Clamp Range (mm)

U Screw

Main Dimensions

Nominal Failure Load
(kN)

Matching Insulation Cover Model

Number

Diameter

C

M

NLL-190

35~95

35~50

Φ7.6~16.5

2

M10

19.0

14

40

NLLZ-190

NLL-230

95~150

70~95

Φ8.5~20

2

M12

23.0

16

50

NLLZ-230

NLL-285

150~240

120~150

Φ11.4~23

2

M12

28.5

16

60

NLLZ-285

NLL-320

240~300

/

Φ12.7~26.5

2

M12

32.0

16

60

NLLZ-320

NLL-320J

/

150~185

Φ12.7~26.5

4

M12

32.0

16

70

NLLZ-320J

NLL-350

/

240~300

Φ13~30

4

M14

35.0

16

80

NLLZ-350

1. This product can also be used for stripping installation. When stripping and installing, the aluminum strip should be wrapped to prevent the wire from being damaged. When stripping is installed, according to the range of the clip in the corresponding outer diameter of the package.

2. If you order a product with an insulating cover, please add Z after the model number, such as “NLL-230Z”; if you purchase the insulating cover separately, please select according to the selection table, such as “NLLZ-230”

 


  • Previous:
  • Next:

  • Write your message here and send it to us