Description:

The clamp body adopts a span design to meet the branch wiring between the main line and the branch line in different ranges. The energy storage design is modified by the finite element analysis software to form a “single breath” energy storage system with the connected wires. , To maintain a constant contact pressure between the wire and the clamp; greatly improve the overload capacity and service life of the clamp;

The use of torque nuts can easily achieve the specified installation torque during construction, avoid manual installation failure and damage to the conductor. The wire grooves where the clamps and the wires are in contact are coated with a unique conductive antioxidant. Can be equipped with insulation cover.

Features:

1. Special torque nut with the clamp wires to keep the long term between the constant

2. Contact pressure, body curved design, with the wires connected together constitute the “same breath”of the energy storage system, greatly improved clamp overload

3. Capacity and service life, clamp and the wire contacts within the groove are coated with a unique conductive antioxidant.

Type	Applicable Main Line Range (mm2)	Applicable Extension Range (mm2)	Wire Diameter Range	Bolt Quantity	S	L	Mounting Torque N.m	Equivalent Model
JBY-302	10~95	10~95	Φ3.8~12.0	2×M8×30	14	46	25±3	PGA-302、JBL-0
JBY-502	25~150	25~70	Φ6.0~16.0	2×M8×50	14	50	35±4	PGA-502
JBY-503	25~150	25~150	Φ6.0~16.0	2×M8×50	14	50	35±4	PGA-503、JBL-1
JBY-602	50~240	25~120	Φ8.3~18.4	2×M12×65	19	82	50±5	PGA-602
JBY-603	50~240	50~240	Φ8.3~18.4	3×M12×65	19	132	50±5	PGA-603、JBL-2
JBY-803	95~300	95~300	Φ11.6~23.0	3×M12×65	19	133	55±5	PGA-803、JBL-3