Factory Outlets Voltage Bare Overhead Networks – Parallel Groove Clamps(PG Connects) – Beili
Factory Outlets Voltage Bare Overhead Networks – Parallel Groove Clamps(PG Connects) – Beili Detail:
Product Specification Sheet
Product code |
Main line |
Branch line |
Bolts |
Cables for connection |
AL-16-70-1 |
16-70 |
16-70 |
1 |
Aluminum to aluminium |
AL-16-150-2 |
16-150 |
16-150 |
1 |
|
AL-16-35-2 |
16-35 |
16-35 |
2 |
|
AL-16-70-2 |
16-70 |
16-70 |
2 |
|
AL-16-150-2 |
16-150 |
16-150 |
2 |
|
AL-25-185-2 |
25-185 |
25-185 |
2 |
|
AL-16-70-3 |
16-70 |
16-70 |
3 |
|
AL-16-150-3 |
16-150 |
16-150 |
3 |
|
AL-25-240-3 |
24-240 |
25-240 |
3 |
|
AL-35-300-3 |
35-300 |
35-300 |
3 |
Product Introduction
Parallel Groove Connector AL is mainly used for transmitting current between the interconnected conductors, for example for connection loops on terminal poles or tapping off bus-bars to equipment on substations.
Special designed screw hole and arc shape of the body allow clamp to adjusts to different cable size on each side; Materials of bolt and nut are optional depend on customer request. Options including Hot-dip galvanized steel and Stainless steel ; Pressure pad is applied to achieve uniform pressure along the clamp.
Our design fulfills also the following important criteria:
Holding strength: An adequate mechanical holding strength is achieved. In case of higher values two or more PG-clamps should be used in series.
Corrosion resistance: Maximum corrosion resistance is achieved by using a clamp material that matches with that of the conductor, for example a corrosion-resistant AlMgSi alloy for conductors made of aluminium, al-alloy etc.
Gross-grooved clamp channels enhance both mechanical pullout strength and electrical conductivity.
The installation and use is simple, wire-clamps strength is high, without any magnetic hysteresis.
Installation Method
1.Before connector installation, it is recommended to clean the conductors with steel brush of dirtiness and/or dust | |
2.Unscrew bolt of PG connector to have enough space to place conductors into clamp. | |
3.Place the conductors (branch and main) in the parallel grooves of the connector as shown on the picture. | |
4.Screw the bolt of PG connector with adequate wrench till rated torque value which is designated on the PG connector. |
Product detail pictures:
Related Product Guide:
Our purpose would be to offer good quality products at competitive price ranges, and top-notch support to clients around the whole world. We're ISO9001, CE, and GS certified and strictly adhere to their good quality specifications for Factory Outlets Voltage Bare Overhead Networks – Parallel Groove Clamps(PG Connects) – Beili , The product will supply to all over the world, such as: Grenada, Miami, Melbourne, We have been making our products for more than 20 years . Mainly do wholesale , so we have the most competitive price , but highest quality. For the past years , we got very good feedbacks , not only because we provide good products , but also because of our good after-sale service . We are here waiting for you for your inquiry.
By Lillian from Peru - 2018.07.26 16:51
Customer service staff and sales man are very patience and they all good at English, product's arrival is also very timely, a good supplier.
By Lisa from Gabon - 2018.06.28 19:27