CN
Aluminum Alloy Anchoring clamp PA1500 PA2000
Product Specification Sheet
|
Product code |
Cable cross-section(mm2) |
Breaking load（KN） |
Material |
|
PA1000A |
1x(16-35) |
10 |
stainless steel, Nylon PA66, aluminum alloy |
|
PA1000 |
1x(25-35) |
12 |
|
|
1x(16-70) |
|||
|
PA1500 |
1x(50-70) |
15 |
|
|
PA2000 |
1x(70-150) |
15 |
Product Introduction
Clamp is designed for tension support of ABC cables on wooden and concrete poles as well as on the facility walls. It can be combined with various types of brackets.
Stainless steel wire rope has strong tensile strength and no concentrated stress, which plays a role of protecting and auxiliary shock absorption for optical cable.
The whole set of cable tension fittings includes: Tension pre stranded wire and supporting connecting hardware.
The grip strength of the clamp is not less than 95% of the rated strength of the optical cable, which is convenient to install, fast and reduces the construction cost.
It is applicable to ADSS optical cable lines with span ≤ 100m and line angle less than 25 °
Product Advantages
1. The clamp has high strength and reliable grip strength. The grip strength of the clamp shall not be less than 95% cuts (the breaking force of the strand shall be calculated).
2. The stress distribution of the pair of the cable clamp is uniform, and the cable is not damaged, which improves the seismic capacity of the strand and greatly extends the service life of the strand.
3. The installation is simple and easy to construct. It can greatly shorten the construction time, without any tools, one person can complete the operation.
4. The installation quality of clamp is easy to ensure, and can be inspected with naked eye, and no special training is required.
5. Good corrosion resistance, choose high-quality materials, ensure that the clamp has strong anti electrochemical corrosion ability.
Product Actua
Installation Method
Pull out the wedges from the clamp to make space for messenger line insertation.
After previous step, place appropriate messenger line into the clamp’s space of the wedges
Press the both wedges into the clamp along with messenger line. Direction shown on the right picture. Manufacturer advises to easily knock with small hammer both wedges to achieve better fixation
Place the installed tension clamp on hook, bracket or other similar hanging segment on the wall, pole, etc
